Got a Plumbing Emergency? Call us now: 623-265-4756

Want an approximate price? Get a free phone quote.

Got a Plumbing Emergency?   Call us now: 623-265-4756

0

FAQ

Got Questions?

Find some answers to common questions below. Have a question not listed here? Send us a message down below.

Grease

A grease build up is common in the kitchen sink. When grease is washed down the sink or the drain, it cools and hardens causing a blockage. This is why it is always recommended that you avoid pouring oil down the sink or drain.

Plants and dirt

Plants and dirt that grow underneath your drain as they search for water can block your drains. Blockage from plants and dirt can also occur during your garden clean-up as leaves, dirt and shrubs can easily go down the drain without your knowledge.

Build-up of hair

Hair can block your drains. While this is a common problem, you can simply clear the blockage right away by pulling out the hair using a bent hanger wire. Know how to unblock shower drain full of hair because this is quite a common problem that blocks the inside and outside drain.

Toiletries

When you dispose toiletries on your drain, you are generating serious issues down the drain and sewers. Often, baby wipes and diapers are flushed down the toilet. They absorb moisture, enlarge and blocks water flow along the pipes and your drainage.

Broken pipes

Water pipes tend to wear and tear over time. When a water pipe fractures, it becomes susceptible to blockage compared to pipes that are in good shape.

Poor water flow

Poor water flows down the drain can lead to a build-up of dissolved water minerals. The minerals and sediments build up with time causing blockage in some parts of your drains. Therefore, it is wise that you understand the meaning of down the drain excellent and poor water flow, and get rid of sediments before they cause a major blockage in your system.
Therefore, when you have a blocked drain, it is wise that you look for the underlying cause. You will be able to use the right method to unclog an outdoor drain. Below are some of the best ways you can use to restore water flow in your drain.

To take overall stress off your pipes, measure the water pressure that is going through the pipes. If the water pressure in a plumbing system exceeds 60 psi for an extended period of time, water hammers may start to spring up. As a pipe moves and shifts under pressure, leaks can start to form, thus increasing the need to fix leaking pipes. To regulate pressure back down to a normal level (30-50 psi), have an experienced plumber make the appropriate adjustments to the water regulator on your property, or if necessary, add a water pressure reducing valve. Residential water pressure should never exceed 80 psi.

 

Another way to reduce stress on pipes is to install a water softener. Hard water has high mineral content, which can cause corrosion and lead to buildup of minerals inside water supply pipes. Installing a water softener can help prevent plumbing damage by removing the excess minerals from the water. The softener works by creating an ion exchange between the positively charged calcium and magnesium in the water and negatively charged resin beads housed in the softener appliance. A salt tank is utilized to make brine that removes the collected minerals from the resin beads and washes them down the drain.

Constant Clogging

Nobody likes to deal with a clogged toilet. While they’re not uncommon, random or recurring clogs can indicate an issue. If you have an old, lowflush toilet, you may experience stoppages far too often. If you experience clogs more than once a week, or the clogs seem random and odd, you should probably replace your toilet.

If you don’t want to lose the water-saving benefits of a low-flush toilet, simply replace your current toilet with a more efficient and effective commode. Modern technologies have come a long way, and low-flush toilets are much better than they used to be.

Cracks

When you notice puddles of water around your toilet, you may want to check for cracks in the porcelain. While the toilet may work fine, leaks can waste a lot of water, and that water exposure can damage your flooring over time. It can also result in mold or mildew growth.

Look for cracks in the bowl or the tank of the toilet. If you notice any, or if you hear constant running from your toilet, replace it right away before the situation gets worse. If you can’t tell if there’s a crack, put dye in the water of the tank or bowl and see if the dyed water makes it to the floor.

Plentiful Repairs

Toilets shouldn’t need to be constantly repaired. If you find yourself regularly calling for a plumber to fix the toilet, replace it. Frequent repairs can add up, and you can save yourself a bit of cash over the years if you invest in a new toilet.

Or, if your toilet requires numerous repairs all at once, it may be cheaper to replace the toilet instead. Discuss the situation with your plumber, and he or she can help you weigh the pros and cons of each option.

Excessive Age

Even if your toilet is a little old, it may work just fine. But older toilets are often more inefficient than the newer models, so it may be a good idea to replace your toilet and save some money and water. Consider a toilet with a dual-flush feature. It allows you to partially flush for liquid waste and fully flush for solid waste. That way, you can maximize your savings both in water use and utility costs.

Wobbling

If your toilet wobbles, it may be a simple problem of loose screws. A plumber can easily tighten the bolts and ensure everything is properly placed. But wobbling can also signify a bigger problem. The floor beneath the toilet may be rotting away or water damaged, so if you notice wobbling, call a professional to check it out.

Inefficient Flushing

When you find that your water bills are high, investing in a new, water-efficient toilet can help you keep your bills down. The average toilet uses three to five gallons of water with each flush, while a low-flush toilet uses about two gallons for every flush. If you have a large family or are environmentally conscious, such a change can help lower your water bill and water usage.

Surface Damages

If you have a lot of scratches on the surface of your toilet, you may want to replace your toilet for cosmetic reasons. Excessive scratches can make it difficult to keep the fixture clean. This damage is more common with older toilets that have been scrubbed numerous times over the years, so if you find that you’re cleaning your toilet more often than you should, it could be time for a replacement.

Built-Up Mineral Deposits

In areas with hard water, the minerals in the water can collect in the inlet holes and syphon tube. Such buildup can keep water from flowing effectively, making the toilet inefficient. In some cases, you may be able to clear some of the deposits away by chipping at the buildup, but this step is not always successful. If the buildup gets bad enough, your toilet may need replacement.

Basically, when something is obstructing the flow of water inside your drainpipe, it causes the water to drain slower than usual. This creates air bubbles inside the main drain and that’s the gurgle you hear.

 

There are a number of things that cause a blockage inside your plumbing system: hair, dirt, food, and soap particles are a few of many.

Can't Find the Answer?



    By using this form you agree with the storage and handling of your data by this website.